NPIC6C596ABQ

Power logic 8-bit shift register; open-drain outputs

The NPIC6C596A is an 8-bit serial-in/serial or parallel-out shift register with a storage register and open-drain outputs. Both the shift and storage register have separate clocks. The device features a serial input (DS) and a serial output (Q7S) to enable cascading and an asynchronous reset MR input. A LOW on MR resets both the shift register and storage register. Data is shifted on the LOW-to-HIGH transitions of the SHCP input. The data in the shift register is transferred to the storage register on a LOW-to-HIGH transition of the STCP input. If both clocks are connected together, the shift register is always one clock pulse ahead of the storage register. To provide additional hold time in cascaded applications, the serial output QS7 is clocked out on the falling edge of SHCP. Data in the storage register drives the gate of the output extended-drain NMOS (EDNMOS) transistor whenever the output enable input (OE) is LOW. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the registers.

The open-drain outputs are 33 V/100 mA continuous current extended-drain NMOS transistors designed for use in systems that require moderate load power such as LEDs. Integrated voltage clamps in the outputs provide protection against inductive transients. These voltage clamps make the device suitable for power driver applications such as relays, solenoids and other low-current or medium-voltage loads.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
NPIC6C596ABQ NPIC6C596ABQX 935302407115 SOT763-1 Order product

Features

  • Specified from -40 °C to +125 °C
  • Wide supply range 2.3 V to 5.5 V
  • Low RDSon
  • Eight Power EDNMOS transistor outputs of 100 mA continuous current
  • 250 mA current limit capability
  • Output clamping voltage 33 V
  • 30 mJ avalanche energy capability
  • Enhanced cascading for multiple stages
  • All registers cleared with single input
  • Low power consumption
  • ESD protection:
    • HBM JDS-001 Class 2 exceeds 2500 V
    • CDM JESD22-C101E exceeds 1000 V

Target applications

  • LED sign
  • Graphic status panel
  • Fault status indicator

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)fmax (MHz)No of bitsPower dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
NPIC6C596ABQProduction2.3 - 5.5CMOS10090108low-40~125869.054DHVQFN16

Package

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackageOutline versionReflow-/Wave solderingPacking
NPIC6C596ABQNPIC6C596ABQX
( 9353 024 07115 )
ActiveStandard Marking
DHVQFN16
(SOT763-1)
SOT763-1Reel 7" Q1/T1

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFMSLMSL leadfree
NPIC6C596ABQNPIC6C596ABQXNPIC6C596ABQ11
Quality and reliability disclaimer

Documentation (6)

File nameTitleTypeDate
NPIC6C596APower logic 8-bit shift register; open-drain outputsData sheet2017-05-03
AN11537Pin FMEA for NPIC FamilyApplication note2019-10-07
npic6c596aNPIC6C596A IBIS modelIBIS model2016-05-29
Nexperia_document_leaflet_Logic_NPIC_ShiftRegisters_201906NPIC Logic Shift RegistersLeaflet2019-07-12
SOT763-1_115DHVQFN16; Reel pack, SMD, 7" Q1/T1 standard product orientation Orderable part number ending ,115 or X Ordering code (12NC) ending 115Packing2016-07-05
SOT763-1plastic, leadless dual in-line compatible thermal enhanced very thin quad flat package; 16 terminals; 0.5 mm pitch; 3.5 mm x 2.5 mm x 1 mm bodyOutline drawing2018-11-14

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
npic6c596aNPIC6C596A IBIS modelIBIS model2016-05-29

Ordering, pricing & availability

Type numberOrderable part numberOrdering code (12NC)PackingBuy online
NPIC6C596ABQNPIC6C596ABQX935302407115Reel 7" Q1/T1Order product

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.