74LVC162373ADL NRND

16-bit D-type transparent latch

The 74LVC162373A and 74LVCH162373A are 16-bit D-type transparent latches with separate D-type inputs with bus hold (74LVCH162373A only) for each latch and 3-state outputs for bus-oriented applications. One latch enable (pin nLE) input and one output enable (pin nOE) are provided for each octal. Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the outputs. These features allow the use of these devices in mixed 3.3 V and 5 V applications. The device consists of two sections of eight D-type transparent latches with 3-state true outputs. When pin nLE is HIGH, data at the corresponding data inputs (pins nDn) enter the latches. In this condition, the latches are transparent, that is, the latch output changes each time its corresponding data inputs changes. When pin nLE is LOW, the latches store the information that was present at the data inputs a set-up time preceding the HIGH to LOW transition of pin nLE.When pin nOE is LOW, the contents of the eight latches are available at the outputs. When pin nOE is HIGH, the outputs go to the high-impedance OFF-state. Operation of the nOE input does not affect the state of the latches.

The device is designed with 30 Ω series termination resistors in both HIGH and LOW output stages to reduce line noise. Bus hold on data inputs eliminates the need for external pull-up resistors to hold unused inputs.

Not recommended for new designs (NRND), click here for the alternative product.

Orderable parts

Type number Orderable part number Ordering code (12NC) Package Buy from distributors
74LVC162373ADL 74LVC162373ADL,118 935237710118 SOT370-1 Order product
74LVC162373ADL 74LVC162373ADL,112 935237710112 SOT370-1 Order product

Features

  • 5 V tolerant inputs/outputs for interfacing with 5 V logic
  • Wide supply voltage range from 1.2 V to 3.6 V
  • CMOS low power consumption
  • Multibyte flow-through standard pinout architecture
  • Multiple low inductance supply pins for minimum noise and ground bounce
  • Direct interface with TTL levels
  • All data inputs have bushold (74LVCH162373A only)
  • High-impedance when VCC = 0 V
  • Complies with JEDEC standard:
    • JESD8-7A (1.65 V to 1.95 V)
    • JESD8-5A (2.3 V to 2.7 V)
    • JESD8-C/JESD36 (2.7 V to 3.6 V)
  • ESD protection:
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-B exceeds 200 V
    • CDM JESD22-C101E exceeds 1000 V
  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

Target applications

Parametrics

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)No of bitsPower dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Package name
74LVC162373ADL
NRND
Not for design in1.2 - 3.6TTL+/- 123.216low-40~1258825.0SSOP48

Package

Type numberOrderable part number, (Ordering code (12NC))StatusMarkingPackageOutline versionReflow-/Wave solderingPacking
74LVC162373ADL
NRND
74LVC162373ADL,118
( 9352 377 10118 )
ActiveLVC162373A
SSOP48
(SOT370-1)
SOT370-1SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE
Reel 13" Q1/T1

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHS / RHFMSLMSL leadfree
74LVC162373ADL
NRND
74LVC162373ADL,118Not available11
Quality and reliability disclaimer

Documentation (7)

File nameTitleTypeDate
74LVC_LVCH162373A16-bit D-type transparant latch; 30 Ohm series termination resistors; 5 V tolerant inputs/outputs; 3-stateData sheet2017-05-03
AN11009Pin FMEA for LVC familyApplication note2019-01-09
lvc162373alvc162373a IBIS modelIBIS model2013-04-07
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08
SSOP-TSSOP-VSO-REFLOWFootprint for reflow solderingReflow soldering2009-10-08
SOT370-1_118Standard product orientation 12NC ending 118Packing2013-04-19
SOT370-1plastic, shrink small outline package; 48 leads; 0.635 mm pitch; 15.9 mm x 7.5 mm x 2.8 mm bodyOutline drawing2018-10-18

Support

If you are in need of design/technical support, let us know and fill in the answer form, we'll get back to you shortly.

Models

File nameTitleTypeDate
lvc162373alvc162373a IBIS modelIBIS model2013-04-07

Ordering, pricing & availability

Type numberOrderable part numberOrdering code (12NC)PackingBuy online
74LVC162373ADL74LVC162373ADL,118935237710118Reel 13" Q1/T1Order product
74LVC162373ADL74LVC162373ADL,112935237710112Bulk PackOrder product

Sample

As a Nexperia customer you can order samples via our sales organization or directly via our Online Sample Store: https://extranet.nexperia.com.

Sample orders normally take 2-4 days for delivery.

If you do not have a direct account with Nexperia our network of global and regional distributors is available and equipped to support you with Nexperia samples.